Wednesday, November 18, 2009

.1uf Capacitors added (C1, C2, C3, C4, C5, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C21, C27, C30, C35, C43, C44, C47, C48, C49, C50)

Well after playing Where's Waldo for an hour, I got all the .1uf SMD caps added.  I was short one, so I used a 1206 that I had (I can always remove it later with a hot air rework gun.) 

UPDATED 11/20: I noticed due to a bad spot in silk screen, I had put C35 into C36 thinking it was C35 so the image has been updated. C36 on the bottom should not be populated. Sorry for any inconvienience.


.1uf Caps placed (top)



.1uf Caps placed (bottom)


C1, C2, C3, C4, C5, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C21, C27, C30, C35, C43, C44, C47, C48, C49, C50
Posted by at
Labels:

2 comments:

  1. Frank VCNovember 19, 2009 at 10:23 AM

    Great job, Mike -- nice work, and it really helps a lot when populating the pcb to be able to see all the parts in perspective. Thanks so much for taking the time to make this record!
    73, Van W1WCG

    ReplyDelete
  2. Mike LoeblNovember 19, 2009 at 10:06 PM

    Hi Van,

    You are very welcome, glad I can help out. It's a bit of stage fright letting people see my solder "skills"... but I'm hoping it will get easier I go thru. I really hope I don't make a big mistake somewhere along the way. :-)

    73,
    -Mike

    ReplyDelete

Subscribe to: Post Comments (Atom)